What goes into drilling water wells?

Water wells indeed have proven to be one big investment. People have dug wells for various scientific reasons, irrigation and drinking water. Have you ever thought as to how the water well is dug? Water Well Nicaragua involves usually involves rig for reaching the aquifer. This kind of drill that is used is based on the topography on which well is being dug. Landscape comprises of a bedrock made of granite for hundreds of feet and an extremely powerful drill is needed that is inclusive of significant amounts of torque. alternatively, in case, the aquifer is at a closer location and the terrain comprises of soil mostly then lighter version drill is used. More powerful and larger drill is used so that drilling can be done at a much higher speed. Here is all you need to know.


  • Drilled wells


Any of the drilled wells consist of holes that have been bored into the ground. The upper part is usually lined with casing. It is the casing in a Water Well Nicaragua that prevents the borehole walls from collapsing and with grout seal and drive shoe prevents subsurface and surface contaminants from entering supply. It also acts as a potent mechanism for pumping and for pipe helping in the movement of water to a surface from the pump.


  • Material quality


The quality of the materials that go into the construction of making Water Well Nicaragua stands to be a vital factor. The casing has to meet particular specifications since any substandard pipe shall not have strength sufficient enough for withstanding the driving without any kind of potential damage to joints. Such damage allows surface or shallow water for entering the well.


  • Preventing contamination


There has to be the attachment of a drive shoe at the bottom for preventing damage during the driving for making good seal including the formation. In some of the applications, cement grout seal or bentonite is recommended for preventing any kind of contamination.



  • Entry of the water



Below casing, borehole’s lower portion is actually the intake, from where there is the entry of water into the well. The intake is an open hole, present in solid bedrock or it can also be gravel packed and screened, depending on the geologic conditions.


Bailing and pumping


Once well gets completed, it is pumped or bailed for developing the well and also determining yield. Many of the areas need work further post drilling for removing material that is fine from the process of drilling. For more information, feel free to contact us!